We count visits only with consent. Cookie policy

Taimao, home page

Menu

Taimao

Amy · International Sales Manager

Phone and email: English and Chinese

Lu Dadong · General Manager

Drawings and technical questions

Phone: Chinese · Email: English and Chinese

Get a quote

Precision parts, made to your drawing.

CNC milling, turning and metal stamping, from prototype to production.

Upload your drawingTake the factory tour

Rendered illustration

Company in figures

  • 2018FoundedSource: FoundedFounded2018BasisDocumentAs ofSourceBusiness licence, registration dateAsk for this recordHow we label numbers
  • 85Lathes and CNC millsSource: Lathes and CNC millsLathes and CNC mills85BasisDeclaredAs ofSourceOwner, 2026-11How we label numbers
  • 10daysSample lead timeSource: Sample lead timeSample lead time10 daysBasisDeclaredAs ofSourceOwner, 2026-11How we label numbers
  • 95%+On-time deliverySource: On-time deliveryOn-time delivery95%+BasisDeclaredAs ofSourceOwner declaration, 2026-11How we label numbers

CAPABILITIES

What we make, and how large.

Each process, with the largest size it takes.

  • CNC milling

    Up to 600 × 600 mmSource: Max sizeMax size600 × 600 mmBasisDeclaredAs ofSourceSupplier information form (owner), 2026-11How we label numbers. ±0.01 mmSource: Best toleranceConditionsmany features, not only hole positions; measured hole positions are typically 0.02 mmBest tolerance±0.01 mmBasisDeclaredAs ofSourceOwner, 2026-11How we label numbers on many features, not only hole positions; measured hole positions are typically 0.02 mm.

  • CNC turning

    Up to Ø100 × 1000 mmSource: Max sizeMax sizeØ100 × 1000 mmBasisDeclaredAs ofSourceSupplier information form (owner), 2026-11, CNC latheHow we label numbers. ±0.01 mmSource: Best toleranceConditionsmany features, not only hole positions; measured hole positions are typically 0.02 mmBest tolerance±0.01 mmBasisDeclaredAs ofSourceOwner, 2026-11How we label numbers on many features, not only hole positions; measured hole positions are typically 0.02 mm.

  • Automatic lathe turning

    Up to Ø20 × 100 mmSource: Max sizeMax sizeØ20 × 100 mmBasisDeclaredAs ofSourceSupplier information form (owner), 2026-11, automatic latheHow we label numbers.

  • Stamping and assembly

    Through partners: electroplating; e-coating; dacromet; spray painting; powder coating; anodizing; PVD; laser engraving.

FROM DRAWING TO DISPATCH

From drawing to dispatch in 5 steps.

Every step has a time and something you receive.

  1. Quote

    Quote

  2. Sampling

    Sample parts

    You approve

  3. Mass production

    Finished parts

  4. Outgoing inspection

    Inspection report with lot number

  5. Shipping

    Packed parts

PRECISION YOU CAN CHECK

Measured on instruments in the plant.

CMM, video measuring and profile projector checks.

  • Precision coordinate measuring machine (CMM), Rational CMS-554MV

    1

  • Precision optical measuring machine, Rational VMS-2010

    1

  • Optical measuring system, AI-Vision

  • Profile projector

    2

  • Microscope, model 1510

    1

  • Granite surface plate, 1000 × 800 mm, Taiwan-made

    2

  • Height gauge, 800 mm, Taiwan-made

    2

  • Micro hardness tester

    1

  • Salt spray test chamber, Huiyuan Instruments, Dongguan

  • Hand gauges: calipers (Mitutoyo, Guanglu), angle gauges (Mitutoyo), pin gauges and thread gauges

Quality system and documents

  • Profile projector
  • Rational precision coordinate measuring machine
  • Micro hardness tester
  • Huiyuan salt-spray test chamber

PARTS AND PROJECTS

Parts we made, with their results.

A selection of our projects, each with one result. The note says if it was measured or declared. Names are withheld where the customer asked.

  • Gold-plated copper pins from a batch

    Phones and computers

    Gold-plated copper pins for phones

    0.01 mmKey-dimension deviationSource: Key-dimension deviationKey-dimension deviation0.01 mmBasisMeasuredDefinitionLargest gap between a micrometer reading and nominal on the key dimensions, tolerance ±0.02 mm, over 20 readingsAs ofSample size20 readingsSourceOutgoing inspection report, Oct 2026Ask for this recordHow we label numbers

  • Brass worms from a batch

    Home appliances

    Worm with a Ø2 mm bore

    0.01 mmBore held toSource: Bore held toBore held to0.01 mmBasisDeclaredDefinitionAs declared by the factory: the Ø2 mm bore is held to 0.01 mmAs ofSourceOwner, 2026-11How we label numbers

Drag to see more

Next step

Send a drawing. An engineer reviews it.

Upload your drawing
Sources

Every figure on this page, with its source and date.

  1. Founded: 2018. Source: Business licence, registration date; as of 6 November 2026.
  2. Lathes and CNC mills: 85. Source: Owner, 2026-11; as of 6 November 2026.
  3. Sample lead time: 10 days. Source: Owner, 2026-11; as of 6 November 2026.
  4. On-time delivery: 95%+. Source: Owner declaration, 2026-11; as of 6 November 2026.
  5. Max size: 600 × 600 mm. Source: Supplier information form (owner), 2026-11; as of 6 November 2026.
  6. Best tolerance (many features, not only hole positions; measured hole positions are typically 0.02 mm): ±0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
  7. Max size: Ø100 × 1000 mm. Source: Supplier information form (owner), 2026-11, CNC lathe; as of 6 November 2026.
  8. Best tolerance (many features, not only hole positions; measured hole positions are typically 0.02 mm): ±0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
  9. Max size: Ø20 × 100 mm. Source: Supplier information form (owner), 2026-11, automatic lathe; as of 6 November 2026.
  10. Key-dimension deviation: 0.01 mm. Source: Outgoing inspection report, Oct 2026; as of 29 October 2026.
  11. Tolerance held: 0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
  12. Bore held to: 0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
  13. Lathes, mills, presses: 123. Source: Supplier information form: 85 lathes and CNC mills, 38 presses; as of 6 November 2026.

Data revised

Get a quote