Data revised Notes
Processes used
CNC-M
CNC milling
CNC milling of plates, blocks and brackets.Best tolerance±0.01 mmNote 1Conditionsmany features, not only hole positions; measured hole positions are typically 0.02 mmBest tolerance±0.01 mmBasisDeclaredAs ofSourceOwner, 2026-11How we label numbersCNC-T
CNC turning
Shafts, sleeves, flanges and fittings, turned on CNC lathes. Example: a worm with a Ø2 mm bore held to 0.01 mm.Best tolerance±0.01 mmNote 2Conditionsmany features, not only hole positions; measured hole positions are typically 0.02 mmBest tolerance±0.01 mmBasisDeclaredAs ofSourceOwner, 2026-11How we label numbers- Stamping on presses from 45 to 600 tonnes and a 350-tonne hydraulic press; turned and stamped parts assembled in house.
Notes and sources
- Best tolerance (many features, not only hole positions; measured hole positions are typically 0.02 mm): ±0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
- Best tolerance (many features, not only hole positions; measured hole positions are typically 0.02 mm): ±0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
Data revised
Quote a part for tablets
Upload a drawing for a quote.
Amy
International Sales Manager
Phone and email: English and Chinese