We count visits only with consent. Cookie policy

Taimao, home page

Menu

Taimao

Amy · International Sales Manager

Phone and email: English and Chinese

Lu Dadong · General Manager

Drawings and technical questions

Phone: Chinese · Email: English and Chinese

Get a quote

Home appliances

We have made parts for home appliances and take on new projects.

Talk to Amy
Data revised Notes

Processes used

  • CNC-M

    CNC milling

    CNC milling of plates, blocks and brackets.
    Best tolerance±0.01 mmNote 1Conditionsmany features, not only hole positions; measured hole positions are typically 0.02 mmBest tolerance±0.01 mmBasisDeclaredAs ofSourceOwner, 2026-11How we label numbers

  • CNC-T

    CNC turning

    Shafts, sleeves, flanges and fittings, turned on CNC lathes. Example: a worm with a Ø2 mm bore held to 0.01 mm.
    Best tolerance±0.01 mmNote 2Conditionsmany features, not only hole positions; measured hole positions are typically 0.02 mmBest tolerance±0.01 mmBasisDeclaredAs ofSourceOwner, 2026-11How we label numbers

  • STP

    Stamping and assembly

    Stamping on presses from 45 to 600 tonnes and a 350-tonne hydraulic press; turned and stamped parts assembled in house.

Related case studies

A selected project

Customer not named · name withheld

Bore held to 0.01 mm

Problem
A thread on a very small diameter, and a Ø2 mm bore that must stay within 0.01 mm.
Approach
The worm is turned in house, thread and bore on the same part. Every lot is released through outgoing inspection with a report.
0.01 mmSource: Bore held toBore held to0.01 mmBasisDeclaredDefinitionAs declared by the factory: the Ø2 mm bore is held to 0.01 mmAs ofSourceOwner, 2026-11How we label numbersBore held to

Notes and sources

  1. Best tolerance (many features, not only hole positions; measured hole positions are typically 0.02 mm): ±0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
  2. Best tolerance (many features, not only hole positions; measured hole positions are typically 0.02 mm): ±0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.
  3. Bore held to: 0.01 mm. Source: Owner, 2026-11; as of 6 November 2026.

Data revised

Quote a part for home appliances

Upload a drawing for a quote.

Get a quoteTalk to Amy
Get a quote